Documentation

Appearance

Operations on Device ​

1. Burn the Firmware ​

Note: Because the burning program of each DTU-Modbus module is different, please contact Acceleronix Technical Support for the specific burning methods.

2. Burn Configuration File to DTU Device ​

img

  1. Click "Download" > "Serial Port Download" on the tool bar.
  2. Click "Import a File", and select the generated xxxxxx_xxxxxxxxxx_local.bin in the pop-up window.
  3. From the pop-up window, fill in the baud rate, port number or other configurations, and click "Open the serial port". Note: You can find the corresponding burning serial port by referring to the PIN number on the development board or the schematic diagram.
  4. Click "Start Download" and restart the hardware device. The download progress will be displayed in the text box. When the download is successful, a pop-up window saying "Download Success" will appear.